How to Set Up a 7.5 Ft Fraser Hill Southern Peace Pine Christmas Tree

By Beach Camera | Published: 2026-10-26

Category: How-to Guides

Learn step-by-step how to assemble your Fraser Hill 7.5 ft Southern Peace Pine artificial tree, from choosing a location to fluffing branches for a natural look.

Quick Answer

Set up your 7.5 ft Fraser Hill Southern Peace Pine by choosing a level spot, assembling the hinged metal sections, and fluffing each branch for a full, natural silhouette.

Choose the Right Location

Before unpacking, decide where your tree will go. The 7.5 ft height needs a room with at least 8 ft ceilings to allow room for a topper. Keep it away from heat sources like radiators or fireplaces, which can dry out the foliage over time.

Consider traffic flow: place the tree where it won't block doors or walkways. A corner or against a wall works well, but if you want a 360-degree view, leave at least 2 ft of clearance on all sides.

Tools You'll Need (Minimal)

You don't need much: a step stool or small ladder, a pair of gloves (optional, for comfort), and a tree skirt or stand cover if desired. The tree comes with a metal stand, so no additional hardware is required.

Step-by-Step Assembly

1. Unpack and Lay Out Sections: Remove the tree box and lay the three sections on the floor in order (bottom, middle, top). The bottom section is the heaviest. Avoid pulling on the branches—gently lift each section by the center pole. Common mistake: forcing sections apart can bend branches. If a section is stuck, twist gently rather than yanking.
2. Assemble the Stand: Remove the metal stand from the bottom section. Open the legs fully and tighten the locking ring or screw. Place the stand on your chosen spot and ensure it's level using a bubble level or by eye. Check that the stand is centered under where the tree will go—adjusting later with the tree upright is difficult.
3. Insert the Bottom Section: Insert the bottom section's pole into the stand. Tighten the thumbscrews evenly to hold it upright. Have someone hold the section steady while you secure it. Over-tightening can strip the screws; snug is enough to keep the tree stable.
4. Add the Middle Section: Align the middle section's pole with the bottom section's connector. Push down firmly until you hear or feel a click. The all-metal hinged branches should fold down easily. If the sections don't align, rotate the middle section slightly until the connector slots match—never force it.
5. Add the Top Section: Repeat the same process for the top section. Once connected, step back and check that the tree is straight. Adjust the stand's legs if needed. A slightly tilted top is normal; you can bend the center pole gently at the connector to straighten it.
6. Fluff the Branches: Starting from the bottom and working up, separate each branch tip and spread them outward. For the most realistic look, angle tips slightly upward and outward, varying the direction. Spend extra time on the outer 12–18 inches of each branch. Skipping this step leaves the tree looking flat. Take your time—fluffing is what gives the Southern Peace Pine its full silhouette.
7. Shape and Final Adjustments: After fluffing, walk around the tree and fill any gaps by bending branches forward or to the sides. Add lights and ornaments as desired. If using a tree topper, attach it last. Check for bare spots from different angles; you can also use leftover branch trimmings (if any) to fill small gaps.

About This Tree

Fraser Hill 7.5 Ft. Southern Peace Pine Christmas Tree - FFSP075-0GR: This Fraser Hill Farm tree features all-metal hinged branch construction and a traditional full silhouette with extremely lifelike foliage. Hinged branches make assembly faster and more stable than hook-in types, and the realistic needles mean less fluffing time to achieve a natural look.
Fraser Hill 7.5 Ft. Southern Peace Pine Christmas Tree - FFSP075-0GR