How to Set Up Your DJI Mini 5 Pro Fly More Combo

Quick answer

To set up your DJI Mini 5 Pro Fly More Combo, unbox all components, fully charge the batteries and RC-N3 controller, install the DJI Fly app, then pair the controller and drone before performing a compass calibration and checking for firmware updates.

Step-by-step setup process

1. Unbox and inspect all items: Open the Fly More Combo box and lay out the drone, RC-N3 controller, three batteries, charging hub, propellers, cables, and backpack. Check for any visible damage or missing parts. Do not skip the inspection—missing propellers or a damaged battery can ruin your first flight.
2. Charge the batteries and controller: Connect the charging hub to a USB-C power source (recommended 30W or higher). Insert each battery into the hub and let it charge until the LED turns solid green. Charge the RC-N3 controller using the included USB-C cable until its LED is solid green. A common mistake is using a low-power charger, which can take 4+ hours. Use a fast charger to speed things up.
3. Install the DJI Fly app: On your mobile device, download the DJI Fly app from the official app store (iOS or Android). Do not use third-party app stores, as they may have outdated or unsafe versions. Ensure your phone is compatible—the app requires iOS 12.0+ or Android 6.0+ with a USB-C or Lightning connection.
4. Pair the RC-N3 controller: Power on the controller by pressing the power button once, then press and hold. Connect your phone to the controller using the appropriate cable (USB-C or Lightning). Open the DJI Fly app, which will prompt you to pair. Follow the on-screen instructions. If the app doesn't detect the controller, try a different cable or restart both devices.
5. Prepare the drone for first flight: Remove the gimbal cover and unfold the drone arms. Insert a fully charged battery until it clicks. Power on the drone by pressing the battery button once, then press and hold. Place the drone on a flat, level surface away from metal objects. Always remove the gimbal cover before powering on—leaving it on can damage the gimbal during startup.
6. Perform compass calibration and check firmware: In the DJI Fly app, go to the main camera view and tap the status bar. If prompted, rotate the drone horizontally and vertically as instructed to calibrate the compass. Then check for firmware updates under 'Check for Updates' and install any available. Skipping compass calibration can cause erratic flight behavior. Do it even if the app doesn't prompt you immediately.
7. Set up return-to-home and safety limits: In the app's safety settings, set the return-to-home altitude (typically 20–30 meters above obstacles), enable 'Low Battery RTH', and set a maximum flight distance and altitude (e.g., 120 meters for most regions). A common mistake is leaving RTH altitude too low—if you're flying near trees or buildings, set it high enough to clear them.

Product details

• DJI Mini 5 Pro Drone Quadcopter Fly More Combo with RC-N3 +Backpack Accessory Bundle: The DJI Mini 5 Pro features a 1-inch CMOS camera, nightscape omnidirectional obstacle sensing, and a gimbal with 225° of flexible rotation. The 1-inch sensor delivers better low-light performance and detail than smaller sensors, while the omnidirectional obstacle sensing helps prevent crashes during your first flights.